Eileen and Ken Case Study

September 19, 2018

Building a Case

When Eileen and Ken built their 2,400 square-foot home amid Michigan sand dunes and trees, they included 52 windows in order to enjoy the view and Thermocore SIPs in order to enjoy long-term savings. “This home was built to stay very efficient, even though there’s a lot of glass,” Ken said.

Air Quality and Cost Savings

To keep their home airtight and energy-efficient, Eileen and Ken chose Thermocore’s 6.5-inch, R-40 structural insulated wall panels and 8.25-inch, R-50 structural insulated roof panels. Chris Barnes, President of Barnes Integrity Enterprises, ran a blower door test that showed 0.2 air changes per hour, or 20 percent of the air in the house leaving and then being replaced under natural conditions.

What does that mean for those who live there? “If you ran a HERS rating on the home, it would be at the extreme tight end,” Chris said. “The home was actually brought up to 20 percent with make-up air added to the ventilation system. That gave source control of all the air, eliminating the potential for zones that could develop mold growth or condensation from temperature changes. It created nearly an ideal scenario.”

With polyurethane foam insulation and no thermal breaks, the wall and roof SIPs also keep energy costs low every month. “Our typical gas bill in the winter months is in the $70 to $80 range,” Ken said. “That includes two gas furnaces, two hot water heaters, and cooking. When we had 17 people here for a week at Christmas and the temperature was zero degrees and below, our energy bill was just $140. This house is extremely efficient.”

Quick and Sturdy SIPs

During the construction process, “Thermocore’s team had our whole house completely enclosed in seven days, including windows, Structural Insulated Panels, and the steel beams I wanted across the foundation,” Ken said. “With Thermocore, time management for putting the house together is big.”

Thermocore SIPs also make the house sturdier, he added. “These Structural Insulated Panels are constructed differently than other SIPs. They should really call them structured independent reinforcement panels. All my walls are squared out and I’ve had no issue whatsoever with anything moving on the house.”